Farmall & IHC Tractors Discussion Board |
Re: Farmall M timing
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by the tractor vet on August 13, 2006 at 07:42:05 from (75.24.6.64):
In Reply to: Re: Farmall M timing posted by CNKS on August 13, 2006 at 07:16:26:
Setting and old farmall by ear is realy not the way to go beause by the time it starts to sound good to where you start to remove the LABORING sound you are way tofar ahead . TDC to +5 degrees at curb ideal is more then enough and at full throttel here again depending on what curve kit it has no more the 35 degrees at full throttel. but with the overbore and stephead or high alt. pistons thats tomuch even with the high test gas . As none of us know for sure what all has been done to the old girl over the years as to how much has been planed off the head or the top of the block or has the cam been changed over the years and alow for ware to the gears thinks change when and H or M is set real close to perfect when your running down the road and ya shove the throttel down there should be some poppen and light backfiren on the coast or slowsdown if you have all this removed then you have the timing to far ahead and you are hurting the bottom end pull power of the tractor.
Replies:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|