Farmall & IHC Tractors Discussion Board |
Re: reversed polarity..
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by John T on June 14, 2006 at 06:10:31 from (66.244.90.5):
In Reply to: reversed polarity.. posted by karl f on June 13, 2006 at 20:17:50:
Karl, I agree with Bob in that running the genny in reverse shouldnt have hurt it, but there could have been harm done to the Voltage Regulator if things werent done correct or the genny didnt get re polarized correct. You say you shorted the field to ground and still no charge, so AFTER YOURE SURE THE GENNY IS POLARIZED CORRECT try it again when running and the field grounded and if still no charge, leave the field grounded and by pass/jump the VR's cutout relay by momentarily connecting its BAT and Gen (or Arm) n see if she charges then?? If theres no charge with the field dead grounded and the VR's cutout relay by passed, the VR is essentially out of the circuit n she ought to charge IFFFFFF THE GENNY IS GOOD along with all the other wiring etc. POLARIZE THE GENNY FIRST BEFORE TRYING THIS John T
Replies:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|