Farmall & IHC Tractors Discussion Board |
Re: only runs with starter switch held down
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by John T on April 01, 2006 at 16:38:57 from (66.244.90.98):
In Reply to: Re: only runs with starter switch held down posted by John M on April 01, 2006 at 14:38:25:
John, I certainly agree, it (ammeter) will read correct if its "wired correctly" but if the IGNITION SWITCH is wired/fed off the starter switch from the "battery side" as you claim, the ammeter WILL NOT INDICATE/REGISTER the current draw of the coil (around 4 amps). In order for the ammeter to indicate/register current it must flow through it, but if the ignition switch is served from the starter switches battery side (same as ammeters input supply terminal) its current IS NOT REGISTERED by the ammeter since its current does NOT flow through it. If the Ignition is wired off the starter switches battery side instead of the load side of the ammeter, with the tractor not running if you turned on the ignition the ammeter WOULD NOT REGISTER MINUS 4 AMPS as it should if it were wired correct. The ammeter is supposed to register the net current flow into (charging) or out of (discharging) the battery which is why the ammeters input supply side is wired ONLY to the battery/starter while the ammeters other load side feeds all loads (lights and ignition) PLUS connects to the gennys output via the Cutout Relay. Hope this helps clarify things, great fun discussion, take care yall John T Nordhoff in Indiana
Replies:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|