Farmall & IHC Tractors Discussion Board |
Re: BRAKES ON 806
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by the tractor vet on February 16, 2006 at 19:01:10 from (64.179.117.83):
In Reply to: Re: BRAKES ON 806 posted by HARLEN LARSON on February 16, 2006 at 18:35:05:
Not a big deal to check out , there is one under the fitting on the top of the MCV where the line comes off the top nad goes over to the brake and one under the fitting on the brake valve where the line goes in . One 5/8 wrench and one 11/16th wrench is all that is needed for tools and maybe a dentist pick . One other thing that can cause this symptiom is that one of the brake adjusters is stuck and that the plates and disc's are setting wrong in the drum and it takes a bit for the hdy. fluid to force the pistion out far enough to make the brake work or the return springs are stuck . Myself i would just pop the drums off and look at what i have in there .
Replies:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|