Farmall & IHC Tractors Discussion Board |
Re: Hydraulic Valve plumbing on MTA
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Nat on December 12, 2005 at 05:17:50 from (64.80.108.52):
In Reply to: Re: Hydraulic Valve plumbing on MTA posted by Tom Graham on December 12, 2005 at 04:11:53:
The control lever on the reservoir only gives you one-way control. It works just like the belly pumps, except that it maintains hydraulic pressure when you press the clutch pedal. There are two pressure outlets on the rear of the reservoir. They come out of the casting that protrudes from the tank. All other plugs that are in the tank directly are return lines, except the pressure line from the pump to the tank. I believe the top outlet is the main outlet, while the bottom one is the delayed outlet. Unless you're running a set of mounted cultivators, the bottom outlet isn't used. Run a hose from the top pressure outlet to the "IN" port on an OPEN CENTER hydraulic spool valve. Run a hose from the "OUT" port of the valve to one of the plugs in the side of the reservoir. Run a hose from each of the work ports on the spool valve to a standard pioneer hydraulic quick-coupler at the rear of the tractor. It is important that the valve is open center, or you run the risk of blowing one of the components in your hydraulic system sky-high from pressure buildup.
Replies:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|