Farmall & IHC Tractors Discussion Board |
Re: 1486 stuck in gear
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by K.B.-826 on October 26, 2005 at 15:56:57 from (66.188.223.190):
In Reply to: 1486 stuck in gear posted by Don Anderson on October 26, 2005 at 06:28:05:
You do not need to pull the seat. Follow the linkage down to the range transmission cover. You'll see two arms on top of the cover, the outer arm is for the reverse shifter, the arm just inside of the reverse arm is for high and low range. It has three detented positions, one for high, neutral in the middle, and one for low. grab that arm with a pliers or vise grip and turn it back to the middle position. Test your results by starting the engine and SLOWLY releasing the clutch pedal in each range. If the engine starts to stall, you're still stuck. You've got some major wear in your shift linkage and the detents under the cover. Get this fixed right away, as getting in two ranges and letting up the clutch pedal is a good way to do some serious damage.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|