Farmall & IHC Tractors Discussion Board |
Re: '54 Farmall Super C Clutch doesn't work
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by RustyFarmall on October 18, 2005 at 08:22:15 from (216.248.75.144):
In Reply to: Re: '54 Farmall Super C Clutch doesn't work posted by Ben Wood on October 18, 2005 at 08:06:16:
Yes, you have the right idea. What has happened is that the clutch disc has sort of rusted to the flywheel, most likely because of moisture in the air. It happens quite often to any vehicle with a clutch if allowed to sit and not be used for a period of time. Doing what OLD has mentioned will usually work, and most likely will work. Just be sure you have plenty of room when you start the engine because the tractor is going to move, and you will not be able to stop it until the clutch is no longer stuck. You might want to be ready to stop the engine, and you also might want to apply the brakes as you are moving. The idea is to try and make the clutch slip, once the clutch slips, the problem will be solved. I am guessing this will happen in less than 50 feet of travel.
Follow Ups:
Home
| Forums
Today's Featured Article -
Tractor Profile: Silver King - by Staff. Silver King tractors were produced by the Fate-Root-Heath Company of Plymouth, Ohio. The company was founded by John Fate in 1884 and was originally called the "J.D. Fate Company". After several mergers over the years, the final company name of Fate-Root-Heath came about in 1919. The first tractor produced was actually called the "Plymouth" tractor and was powered by a 20 HP 4-cylinder engine with a 3x4" bore and stroke. The four speed transmission had a top speed of 25 mph! After more t
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|