Farmall & IHC Tractors Discussion Board |
Re: Charging '50 super a - Sorry so long
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by John T on September 20, 2005 at 19:12:41 from (66.244.90.98):
In Reply to: Charging '50 super a - Sorry so long posted by alannpa on September 20, 2005 at 15:14:49:
Alan, generally speaking if the tractors not running and turning on the lights makes the ammeter swing to discharge, the ammeter polarity at least is correct. HOWEVER thats not the end of the story. If wired correct the ammeters SUPPLY terminal has but one connection and thats to the battery or starter,,,,,while its other LOAD terminal is wired to loads like lights n ignition (via switches) PLUS the BAT terminal on the cutout relay or Voltage Regulator. Is yours wired that way??????????????? Next, some cutout relays are bi polar and work at Positive or Negative ground simply by swapping the BAT and GEN terminals. However, the BAT and GEN terminal on the cutout relay ARE CORRECT FOR AND ASSUME YOURE AT THE CORRECT POLARITY. Insure ammeter wiring then see if all your polarities (battery n relay) are correct. The relay MUST be wired to correspond to your ground and if it doesnt have the Pos or Neg labeling like the bi polar models (i.e ONLY has BAT and GEN labels) its not gonna work right if the tractors polarity has been reversed !!!!! John T
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|