Farmall & IHC Tractors Discussion Board |
Re: IH 986 adjustments
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by the tractor vet on August 15, 2005 at 16:45:54 from (4.124.68.45):
In Reply to: IH 986 adjustments posted by slim51015 on August 14, 2005 at 18:47:46:
Like one said about and 1 1/2 on the clutch pedal on the trans brake have someone holdthe clutch pedal down after you remove the pin then push the clutch all the way down to the stop and see if the pin will slide in while holding back on the trans brake arm adjust till the pin will slide in then add 1 to 1 1/2 turns more let the clutch pedal up and install the pin now for the dump valve here again ya need someone to help , with the tractor in PARK and engine running at and ideal push the clutch pedal to the stop and back off the dump valve about four or five turns and start turning it in till the telltale lite goes out let the pedal up and add one more turn and lock down . The selector valve is suppose to be all the way down till the snap ring touches the nut when in high and all the way up when in low.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|