Farmall & IHC Tractors Discussion Board |
Re: 90 Degree Distributor
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Wardner on August 08, 2005 at 20:32:37 from (4.154.240.246):
In Reply to: 90 Degree Distributor posted by W. Drew SMTA on August 07, 2005 at 19:32:30:
I have done the same thing with an H and it has less room than an M. I am also using the original pull-cable-to-stop mag. I made an adaptor out of 1" thick aluminum plate that offsets the oil filter. The breather pipe had to be relocated as well. The oil filter can also be mounted elsewhere on the tractor by using a stand alone spinoff and running hoses from an adaptor. This would be similar to some trucks applications. I think my Dodge Cummins is like that. I used a Behlin pump and a M&W pump. I forget which is which but one pump replaces what the IH parts book calls "BRACKET, Distributor or Magneto". This saves four or so inches. I put a support on the mag due to the leverage. I used a timing gear out of a 300. I did the whole thing for chuckles. It is not a hard working tractor.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|