Farmall & IHC Tractors Discussion Board |
Re: farmall A valve timming setting
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by scotty on July 25, 2005 at 11:26:52 from (199.231.49.128):
In Reply to: farmall A valve timming setting posted by Tractorfrank on July 25, 2005 at 09:59:49:
TractorFrank, Find the scribed line on your flywheel. Mark it with a white marker. Remove your #1 sparkplug. While your helper hand cranks the motor over slowly put your finger over the plug hole until you feel pressure coming out your now on the compression stroke. Keep rotating the motor until your scribed line is in position on your flywheel. Remove your valve cover. Adjust #1, #2, #3 and #5 valves to .017. Now hand crank your motor 1 revolution and adjust #4, #6, #7 and #8 the same way. Rotate your motor 1 more revolution to bring you back to TDC. Remove your cap on the magneto, your rotor should be pointing to the #1 plug wire. Hopefully this will help. scotty
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|