Farmall & IHC Tractors Discussion Board |
Re: Stage II Hydraulics Follow-Up
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by CNKS on May 02, 2005 at 17:35:59 from (204.249.178.138):
In Reply to: Stage II Hydraulics Follow-Up posted by Dennis Gauge on May 02, 2005 at 14:12:01:
You can cut and paste your old post into this one, if you want to use it for reference. The IH parts manual will tell you all you need to know about assembly -- Case-IH has parts. Assuming you have the stage 2 hydraulics, and not an add on distributer mounted pump, you must have something attached to it when you pull the lever Otherwise its a sealed system with no vent and you will or have damaged something. If you have the remote valve, you have to have the main lever locked back for the remote to work as mentioned in the other post. Make sure you have oil in the system. If the resevoir is under the tank, it is not hard to work on, the hardest part is getting the inside part of the control lever hooked up correctly, because you have to work blind -- you cannot see inside as you put the cover on.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|