Farmall & IHC Tractors Discussion Board |
10-20 engine
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Bob And. on April 04, 2005 at 18:32:50 from (216.248.74.149):
I"m restoring a "29 10-20 and am having trouble getting the engine to hit on all 4 cyls without having the choke half closed. I"ve cleaned the carburetor, made sure all the holes etc are open, raised the float to the maximum level without running over, but nothing seems to help. Compression is 70# on #1, 90# on the rest. Spark plugs are new. The engine misses on #2 & 3 cylinders with the choke open, but runs pretty good with it about half closed. Timing seems right. Adjusting the mixture on the carburetor doesn"t seem to change engine operation much. Valve lash is correct and valves don"t seem to be leaking. I"m running off an auxiliary gas tank so I know the gas line isn"t partially plugged. Anybody got any ideas? I"m pretty well stumped at this point.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|