Posted by P and R Pete on March 10, 2009 at 17:02:35 from (173.86.4.206):
In Reply to: 140 Hydraulics posted by P K Ouellet on March 10, 2009 at 10:31:23:
Hugh! Are you 'dissin' me? LOL!
Hey, I'm a "one-trick pony"!
All I know is my Super-A, it's the only tractor I have and all I'll probably ever have, (just the way she goes). But I took lots of pictures when I overhauled my engine, hydraulic block/pump, and rear brakes/seals, so I'm just trying to 'give back' some of the help I got here, and hope I'm not being a pain-in-the-*ss in the process.
I was so meticulous and asked so many questions and made sure I was doing it right that it took me upwards of 5 months to get it done, when most of you guys here could have had it finished in a weekend! LOL
But hey, I got through it and know what worked for me, and I might as well pass it on.
So PK, here's what I used to get out those bushings...
...and when I stuck it in the bore of the bushing, I 'torqued' it sideways so the tip grabbed inside the bore, and the side of the rubber grabbed the rear edge of the bushing (so no scratches), and while holding it 'torqued', I pulled back straight, and the bushings came right out.
One more thing that helped- a 'drag link' socket that I got from NAPA, to unscrew the 'Pressure Regulator Valve Seat'. About $13.
And Hugh, I love you, man! You have more knowledge in your left pinky that I will ever have the chance to accumulate in my lifetime.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.