Farmall & IHC Tractors Discussion Board |
Re: 706 update!
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by the tractor vet on February 24, 2005 at 13:32:33 from (4.124.75.254):
In Reply to: 706 update! posted by ChadS on February 24, 2005 at 13:08:45:
Aren't the valves suppose to be 27 , now i could be wrong here but for the first time let them a bit lose like 28 or 29 and put it on the duyno as soon as ya make sure that it is ok and no leaks and load it to around 45 50 hp and vary the rpm's and let it get up to operating temp and watch it close for oil pressure and temp and make sure the timming is wright on at full throttel . I like to run them for 7-8 hours then i am happy. After ya get 3-4 hours on her check and see what kind of toqure rise we got 97 hp out of eugens . One of these day i am going to try and put electronic fuel injection on one just for shuts and giggels. and see if i can get a 150 hp out of one .
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|