Farmall & IHC Tractors Discussion Board |
Re: 140 into an A
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Stan(VA). on January 12, 2005 at 06:37:29 from (208.59.156.146):
In Reply to: Re: 140 into an A posted by Hugh MacKay on January 11, 2005 at 17:56:55:
You will need all the accesories from the 140 (water pump and lower radiator hose connection, fan, generator) as these are all driven by a single thinner fan belt. I don't know how bad the interference will be, but I think the upper radiator neck is going to be the problem. On the early tractors theupper neck and radiator inlet join at about a 45deg angle, on the 140 the upper neck points straight up and the radiator inlet points straight back. It uses a radiator hose with a 90deg bend. The 140 radiator is going to be taller and wouldn't fit under his grill. I think people have done this swap before (I've seen a C153 in a C), but don't know what was required on the upper connection to make it fit. Didn't know what the issues were at time, so didn't look close enough :( Stan(VA).
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|