Farmall & IHC Tractors Discussion Board |
Hydraulic (pwr. steering) problem - will this work
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by fixitforfree on January 07, 2005 at 20:08:07 from (4.227.122.245):
I have a 364 diesel that has the dual hydraulic pump setup - 2 seemingly identical pumps mounted back to back. 1 pump runs lift, 1 pump runs the power steering. They are getting weak. Can I simply buy a pump that fit the 444 diesel (similar to my 364)and plumb it to supply both the lift and the power steering? Why do I need 2 pumps - they cost $500 to replace vs. $250 for the single pump to fit the 444. My buddies 444 made me wonder. It has the same pump as my front pump yet it has enough flow to supply his lift and steering. But, the 444"s steering cylinder setup is different, under the engine where mine is on the left side running parallel with the tractor. What am I missing here, will this work? IH part #704330R95 for "single" 444 pump IH part #3063911R93 for "dual" 364, 354 pump
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|