Farmall & IHC Tractors Discussion Board |
Coolant leaking... making me CRAZY!!!!!!
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Phil from MD on December 21, 2004 at 10:24:12 from (67.131.37.63):
I own a 1962 IH 404. I have changed the radiator hoses out, put a thermostat in (did not have one) and cleaned everything off. I reassembled everything using new SS hose clamps instead of the IH style hose clamps. The hose clamps that IH shows in the parts book are the ones with the single nut that you turn in that pulls the clamp tight and not the typical hardware store type clamps. Anyways, I have tightened the hose clamps up as much as I can and I simplyt cannot get them to stop leaking coolant. I know it sounds crazy! but coolant keeps dripping out albeit very very slowly. Do I need to use the IH style hose clamps? Are they designed to hold much tighter? Can I put gasket sealant compound on the inside of the hoses to stop the leaking? I have replaced rad hoses so many times and have never had a problem like this. What a pain!! any help would be appreciated. Thanks Phil
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|