Farmall & IHC Tractors Discussion Board |
Re: 1066 3pt
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by the tractor vet on December 15, 2004 at 07:00:36 from (4.124.95.210):
In Reply to: 1066 3pt posted by Brad Merck on December 14, 2004 at 18:21:34:
That is not a real big problem the lever from the torshion bar jumped off and can be fixed with out to much troubel take the top link plate off and look in to the right side of the housing and you will see a lever comming up from the bottom and then look for the lever or arm that is in front of it , it is spring loaded and will a bit of pullen to move it back use a pice of baler twine or a ladys foot bar ( it will save your fingers ) take a small pry bar and pry the arm comming up to the left just enough to get the top arm past and on the back side of the bottom one . There may be excess wear on the top arm or it may be bent a bit and it will take a littel bit of bending not not much as it WILL BREAK . IF it is real loose i have taken and welded a body washer on the frame side of the lever comming up so it will not hop off anymore.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|