Farmall & IHC Tractors Discussion Board |
Hey redrider that's a very nice 300
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by B Watson on December 08, 2004 at 19:44:24 from (216.168.109.196):
Thanks for your comments on my 300, it'll be a while, if ever, till I can have her looking as nice as your puller. I got her out of the shop and power washed many years worth of grease and debris off tonight, took advantage of nice above freezing temps tonight. Drove her up and down the lane a couple of times and noticed that the steering although generally loose seems to have a tight spot, I'm guessing it hasn't ever been looked at, how tough is it to find a power unit for one of these 300's? Also the recommended setting for the needle jet is 5 turns out, but it seems to run good (no Load) at about 2- 1/2 turns out. other than that it starts real good and idles like a kitten. I notice that all the pictures show an upright exhaust, mine is turned down, and there is no hole in the sheet metal for the upright pipe. and the hood sides are attached with piano hinges, this I'm guessing is not original. thanks for your help, I'll have more questions as I start unbolting stuff.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|