Farmall & IHC Tractors Discussion Board |
Re: hard shifting 706
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Haymaker on August 10, 2004 at 08:03:49 from (128.163.196.154):
In Reply to: hard shifting 706 posted by caseyc on August 10, 2004 at 07:15:54:
We just had the same problem with our 806. Speed trans. shifted fine, but the range trans. would only shift reverse, neutral, and halfway into low. Under the range transmission cover(underneath the operators platform)there is a ball and cam/detent assembly which keeps the shifter in a gear when you shift. On ours, the whole assembly was wore out and the roll pin that held it on the shaft was broken. Basically, the whole assembly was binding when we tried to shift. We fixed the problem and now it works fine. Another thing I did was to adjust the transmission brake which is simply an arm with a pad that slows down the rotation of the gears when the clutch is depressed. It is under the belly of the tractor directly below the brake pedals. Adjust this according to the manual. It could need a new pad if the one you have is totally wore out. This is just my experience. Hope this helps you out. Brandon
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|