Farmall & IHC Tractors Discussion Board |
Gears Grinding in Cub
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Jeff_MI on May 31, 2004 at 10:10:49 from (24.247.143.159):
A Cub I bought grinds the gears slightly (reverse and 2nd) when I shift; however, once I shift it into gear, I can change to another gear without problems if I keep the clutch in. I can hear the transmission turning a little when the clutch is in. Here's what I tried so far: 1. I replaced the throwout bearing. The clutch disk looked to be a good thickness, but I didn't remove the pressure plate to look at the faces. 2. I adjusted the clutch pedal until the throwout bearing was 1/8" from the plate. At this point, I could hear some "grinding" when I pushed the pedal all the way down with the tractor in neutral. The pedal also would push back on my foot. Also, regardless of what I do, the rear pulley always grinds when I try to engage it. I adjusted the pedal until the grinding sound in #2 stopped, and that's where I am now. I now have a bearing clearance of about 3/16". It seems to me that the transmission is still turning a little when I put the clutch in, but when I put it into gear it stops turning; maybe it's not completely disengaging. I would like to know what else I could do to fix this, or at least find out why I'm having this problem. Thank you.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|