Farmall & IHC Tractors Discussion Board |
Re: Model H Transmission...need lots of help!!!!!
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Burt on May 18, 2004 at 22:31:20 from (172.193.8.224):
In Reply to: Model H Transmission...need lots of help!!!!! posted by jason r on May 18, 2004 at 18:40:14:
You DO NOT have to split a H or M to work on clutch or transmission. Remove coupling to hyd. unit, remove hyd unit, this takes 2 people and a piece of rod or pipe. Remove coupling between clutch shaft and input shaft to tran. Take out input assembly, remove top shaft, be sure to keep shims to reinstall or your ringgear--pinnion clearance will be off. remove lower shaft. replace all brgs, seals, and any gear that has rounded or broken teeth. 5th gear is the weak part of H tran. You will need both 3rd gears, 4-5 slider and input shaft, at least. Remove chips/shavings from bottom of case.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|