Farmall & IHC Tractors Discussion Board |
Re: Re: Re: Re: HEY CHADS, about your 460 puller
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by ChadS on April 23, 2004 at 06:19:38 from (66.228.96.146):
In Reply to: Re: Re: Re: HEY CHADS, about your 460 puller posted by riverbend on April 22, 2004 at 16:46:41:
I don't know how I did it. It just went together so well, once I got started in it, went together like a jig saw puzzle. I have been asked that question before about M engine in a H. HMMMMMM,,,, All I can say at this time is anything is possible, You would have to build a flywheel, I am not sure if the H and M bolt pattern in the crank are the same pattern for the flywheel bolts. The H flywheel can be re drilled for a larger bolt pattern, To fit the M crank, As long as you can mount the rear engine plate to the rear of the M block, make it solid and safe, the frame rails from the 460 can be used to get the side frame rails to clear and bolt up to the front of the M motor mounts, It possibly could be done. The 560, is the same bell housing pattern as the M, the early 460 are the same bell housing as the H-350. To put a 6 cyl in a M, you could unbolt the 560 from the engine plate forward, and bolt it into an M, yes some work may be involved to make the starter work, but the big 560 flywheel will fit into the M bell housing. Chad
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|