Farmall & IHC Tractors Discussion Board |
Re: Starting 606 deisel
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Aces on March 25, 2004 at 10:33:54 from (67.0.17.44):
In Reply to: Starting 606 deisel posted by Johann on March 25, 2004 at 08:38:32:
Johann If you have a head of fuel in the tank you should get go flow at the pump let the return line to the tank loose until you have fuel running out then with in lines to the injectors loose crank the engine untill you have fuel at the injectors. tighten injector lines and crank till you have smoke then hear up the glow plugs and it should start. One thing to remember if the delievery valve is not working on that pump it will never start or run If you had the pump rebuilt by a desiel shop I am sure it is working if not it may not have been checked. If you rebuilt this engine and fuel system it should not be hard to start. There was a post just the other day about this engine and I don't agree about them being hard to start if this engine is hard to star then a 350D should have never run. My 3 or 4 cents.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|