Farmall & IHC Tractors Discussion Board |
Re: Re: H Block drain and Rad. Vent plug question
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by don on March 21, 2004 at 15:57:46 from (68.253.229.30):
In Reply to: Re: H Block drain and Rad. Vent plug question posted by Wilbert Sick on March 21, 2004 at 06:35:52:
Well!!! I tell you fellas (now I sound like my dad)back when I was young not so long ago maybe late fifties in Ohio because we were too poor to keep the radiators fixed we only kept anti-freeze in our chore tractor, the H and the rest were our feed grinding tractors M Farmall and McCormick W-30 we would drain the blocks because we only put water in them and we finished at the end of the day we would loosen them while they were hot and wait till they were cooled down to finish taking them out and you better stand back out of the way. This was really a very common practice around our neighborhood until they came with coolant anti-freeze combo.This didn't sound too bad except when you woke up in the middle of the night and remembered you didn't do this fearing a cracked block which we had on the W-30 once. Anyway use your own judgment on wether to drain or not but if you are heat the tractor up and try carefully to loosen the plug then wait till it cools down thoroughly to finish taking it out and when you put it back in make sure to use pipe tape and pipe dope then removal becomes much easier in the future.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|