Farmall & IHC Tractors Discussion Board |
W6 stuck in reverse
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Rob Johnson on February 13, 2004 at 20:59:52 from (203.87.8.105):
I lent my trusty ol' W6 to a neighbour , went to check on them a little while later , they were jammed in to a fence , stuck in reverse !. The tractor has never given gear selection trouble before !. I tried to get the lever out , but it looks like a "farmer repair" job , it has a bolt replacing the pin , and i can't stop it from turning , it looks like the head was ground off !. I think I will - 1/ jack the nearside wheel up, and try to get the lever back in to the reverse position. 2/weld something on to the bolt , so that i can hold it , to undo the nut. 3/Replace it with an original gearlever and pin from an AW 6 parts tractor , that are in VGC. My question is , the casting in the gearbox housing is very loose , how will I tighten this up , for the pin ?. What electrics should i remove from the tractor , before I stick weld ?. Regards Rob Johnson.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|