Farmall & IHC Tractors Discussion Board |
Re: '65 model Farmall 140 hydraulic lift
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Haas on January 25, 2004 at 16:42:55 from (12.65.79.139):
In Reply to: '65 model Farmall 140 hydraulic lift posted by Jimbo on January 25, 2004 at 14:43:28:
Drain out the fluid, remove the filter screen and clean it. Put in new HyTran fluid. Be sure to remove fill plug before you remove the drain plug or you may get wet with fluid, as there is no vent and frequently there is pressure in the reservoir. The filter screen is removed by removing the four bolts in the flange on the left side of the unit (opposite the manifold block). Get a new gasket for the screen. What you are describing is typical for these units, as they most all labor on the rearward stroke, but likely it will improve with new fluid and a clean spring. If the tractor has the helper spring on it, one reason for the laboring is that the pressure of the big spring must be overcome on the rearward stroke, although most all of them do labor some even with no spring.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|