Farmall & IHC Tractors Discussion Board |
Uneven clutch release levers - '47 H
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Dave in CT on January 19, 2004 at 11:01:07 from (64.252.221.75):
Another first-timer question: Towards the end of an hour's worth of snow plowing, I got some grinding when shifting. In stead of my usual sufficient clutch depression, I made sure to stand on the clutch pedal and the grinding went away, for a while. It came back, even with standing on the pedal, as I parked in the barn. So the clutch was partially engaged even with my depressing the pedal all the way. Took a look at the clutch and found one of the three release levers is riding on the release bearing, one is about 1/16" off the bearing and the last is about 1/4" off the bearing. Can these be adjusted individually? I know all are supposed to be 3/16" away from the release bearing. If they are individually adjustable, should I try to even the other two levers with the one that is 1/4" away from the release bearing and then adjust the pedal rod to get the 3/16" clearance? I've about 1/2" of threads on the rod, inside the pedal lever. The clutch was performing fine up until now. What I can see of the clutch plate itself looks like it's got a healthy 1/8" or more of pad. I'd checked the free play on the pedal about six hours ago and that was pretty much right on the 1 and 1/8". I did not check the release lever clearance until now. Thanks, Dave
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|