Farmall & IHC Tractors Discussion Board |
Re: Bob Melville ---- I need your HELP!!!!!!!!!!!
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Bob M on January 09, 2004 at 07:57:07 from (165.170.128.65):
In Reply to: Bob Melville ---- I need your HELP!!!!!!!!!!!!!!! posted by Farmall Freddy on January 09, 2004 at 07:09:48:
A couple suggestions: 1 - Install the smallest pulley you can find on the alternator. There's no danger of overspeeding it on a Cub, and the smaller pulley will spin the alternator fast enough at low speed for it to begin to charge. 2 - Recommend staying away from self-exciting (so-called "single wire") alternators. They are more expensive, and you may have trouble spinning it fast enough on startup to get it to begin to charge. 2 and 3 wire setups turn on at a much lower RPM than will the single wire units. Punch below for wiring diagrams for 1 and 3 wire Delco alternators. Note: If your alternator is not a Delco 10SI, the wiring may be different!
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|