Farmall & IHC Tractors Discussion Board |
Curing rusty H gas tank for the winter
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Dave in CT on December 16, 2003 at 18:23:11 from (204.60.63.52):
Had a few stalls and reduced power situations with the '47 H during the last snow-plowing. Haven't had time to go over all systems since I bought it this spring. Made it to the barn at least but wasn't able to get it started after that. I wasn't getting a gas smell during starting attempts so I pushed a wire through the fuel line and cleaned the carburetor and sediment bowl screens. I only got a good stream when I took a thin rod and nudged some rust flakes from the outlet opening inside the gas tank. This cured my problem for now but I'd like to know it's not going to come back during some blizzard. It's got some rust around the threads where the outlet pipe screws into the tank - about a 1/4" band around the pipe. I'm worried I might break away part of the tank if I try to unscrew the outlet pipe/shutoff/sediment-bowl assembly. If this happens, is that something that's a fairly easy brazing fix or should I have a line on a new tank before I make the attempt? I just don't want to be down during the next storm. OR should I just roll some pea-sized gravel in the tank, hope that breaks off enough of the next generation of flakes to get me through the winter and do the sandblast, etch, coating of the tank in the spring? Thanks, Dave
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|