Farmall & IHC Tractors Discussion Board |
Re: Re: Re: Re: Re: Farmall H carburetor rebuild k
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by rebuilder on December 10, 2003 at 18:04:19 from (216.241.134.121):
In Reply to: Re: Re: Re: Re: Farmall H carburetor rebuild kit h posted by Brian Schmidt on December 10, 2003 at 17:39:40:
Brian: I am not sure which jet you are talking about on which tractor. Most of my tips come from the many failures I've already had ( and still am making)! The salvage yard I work for is stictly Farmall/I.H. tractors. I have had no formal training other than experience, and you would not believe some of the carbs I get in to rebuild. Many have been out in the weather for 15-20 years and are full of rust. Those are fun. One of the luxuries I do have is access to so many carbs is I can do a lot of expirementing on the junk ones. Suffice to say that in general terms on carburator jets, The "pressed-in" jets I have yet to find a solution to remove without damaging them. Now the jets which are screwed into the carb I have a little better luck with, but only a little. I have built up quite a large collection of left handed drills bits, along with specially sized taps to removed busted or frozen jets. Among my other adventures are dualspeed pto's up to magnum series,4&6 cylinder distributors,Hydraulic remotes,starters,hyrdaulic clutch assists,and mechanical T.A.'s. The work never seems to be done! If ever you have any questions in any of these areas I will give you a practical answer as possible.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|