Farmall & IHC Tractors Discussion Board |
Re: M Farmall Hydraulics
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by FM on November 30, 2003 at 19:46:21 from (164.107.104.59):
In Reply to: M Farmall Hydraulics posted by Rick Whitley on November 30, 2003 at 17:02:35:
As far as the live pump goes... The hose that doesn't go to the belly should go to a valve. This valve will have three hoses coming from it---2 to the rear of the tractor w/ couplers on them, and one to the vent of the belly pump(a hole in the top of the clutch housing). on the "regular" M, there are elbows with plugs in them on the sides of the clutch housing--2 on the left side, and one on the right. the one on the right and one of the others should lift immediatly when you pull on the rod. The other one on the left is a delayed action cylinder. If you want 2 way hydraulics you'll need a 2 way valve. if single way hydraulics are OK, just run a hose from one of the ports on the side of the housing back to the rear of the tractor and put a coupler on it. Either way, use a break away style coupler at the rear. hope this helps Mike
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|