Farmall & IHC Tractors Discussion Board |
Re: Re: IH 5488 MFWD Front will not pull
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Dan on October 03, 2003 at 20:11:02 from (24.223.17.29):
In Reply to: Re: IH 5488 MFWD Front will not pull posted by Jeff-OR on October 02, 2003 at 13:13:24:
I pulled the front driveline off and you nailed it right on the head. On the front of the drive shaft is a splined flange with four bolts that connect the drive shaft to the front differential. The splines were stripped on the flange and the splines on the shaft were pretty worn. There was a splined coupler on the back side of the drive shaft but all the spline were good there. It cost me 30 minutes to take apart, $236.00 for the flange, $270.00 for new drive line, & probably 30 minutes to put back together. The parts will be in Tuesday. I felt this was pretty cheap considering the alternative (splitting the tractor). Thanks for the help, Dan
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|