Farmall & IHC Tractors Discussion Board |
Question: M breather tube in head?!?
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Daniel, WI on June 17, 2003 at 08:38:40 from (198.80.4.120):
I just finished a Rebuild on a "M" that I picked up with a cracked Head. I replaced the head with a SMTA 8060, cleaned up the FireCraters, Put in new rings, Bearings, etc. Had my Dad help me and we did it on fathers day weekend, I really enjoyed the time spent with the old man... Any Who: On the head is about a .300" tube that screws into one side of the head, and runs to the other side and screws in. The tube comes straight up and travels above the rocker arm assembly, then goes back down. It also has a small hole in the top of the tube. It has a 1/4" NPT adapter going into the head that accepts the compression fitting from the tube... What is the function of this tube? It looks to be associated with the breather that goes back to the oil bath air cleaner... I assumed it vents the positive crank case fumes. I couldn't find it in the manual anwhere. Needless to say I am having a fun time finding a 1/4" NPT to compression fitting adapter, and was way to impatient to start the tractor... So I started it without the tube installed. Now the skim of oil I am seeing in the coolant could be left over from the cracked head, but it may have something to do with this elusive tube that has successfully hidden it's function from me:) Sorry for the long post, But what does this tube DO? Thanks, Daniel
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|