Farmall & IHC Tractors Discussion Board |
IH 460 PTO adjustment (560)
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Mike on April 27, 2003 at 13:19:01 from (12.216.49.223):
The PTO on my 460 utility runs all the time. No matter if lever is engaged or not. When I disengage it, it does not run at full power, but it still turns my bush hog squealer mower at a good clip. I have adjusted the linkage in and out and cannot find a good position that completely disenages it. I noticed there are two square key notches on the engagement shaft coming out of PTO it holds the linkage for lever. Can this be moved to a second position for adjustment?. Today I changed the hy-tran fluid in it and cleaned the vent cap. It was clogged shut. Any ideas? Pretty sure this is same PTO as on 560 and probably some other models.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|