Farmall & IHC Tractors Discussion Board |
Farmall H - PTO
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by craig on March 22, 2003 at 15:09:35 from (205.188.209.78):
I energetically tore apart my H a long time ago to replace both ends of the PTO engagement, as both ends were completely worn out. I've removed everything up to the transmission countershaft, which I'm having some trouble getting out. I removed the screw-on bushing on the front of the shaft, and the snap ring on the back. I was assuming the shaft has to come out the back and all the gears slide off inside the tranny, but I can't seem to get it out that way. One problem may be that the bushing on the rear is really buggered up, so the bearing can't come off first (if it is suppose to). How does the rear bushing attach to the countershaft? Either I am missing something obvious, or I am missing something obvious. Please help! On a related note, the picture of the two engaging parts (bushings) shown in the parts book do not look like what I have in the tractor. I'm looking at pg 226, part 18 and 18A. Tractor serial number is 26266, so this should be the right arrangement (everything else looks the same). Thanks, Craig
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|