Farmall & IHC Tractors Discussion Board |
H felt washer
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Rod on February 04, 2003 at 18:11:47 from (152.163.213.49):
Hi all, I just got in my engine kit a couple of weeks ago for my 50 H. Got everything back from the machine shop and started to put it together. Heres my questions. The kit is a Tisco and in it are the two halves for the rear main felt seal, the felt for the back of the water pump pulley and another felt washer/seal that measures about 1 1/4 in. across and about 9/16 in. inside. What is it for? I dont recall finding one this size when i tore it down. also when i cleaned up the bolts I found 2 bolts that have brass washers on them. I assume they are for the side lifter/pushrod cover but there should be 3 for that. Do they go somewhere else? Thanks for any help.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|