Farmall & IHC Tractors Discussion Board |
Re: Farmall H Lift-All Hydraulics
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Irv on July 24, 2002 at 17:41:22 from (172.153.11.119):
In Reply to: Farmall H Lift-All Hydraulics posted by Two Bit on July 24, 2002 at 06:24:28:
I put a Saginaw hitch on my H. Best thing i ever did. The 2 cylinders seem to work great. I have a 48 and I rebulit the pump - the seal around the shaft was gone. I show 1000 lbs of pressure. I have a Cross convertra double action valve. And yes you can have down pressure. The valve comes set up for it out of the box. The guy @ Saginaw sold it to me. You will need 2 hoses from the pressure side and 2 hoses from the relief side. Each pair will need to be teed together. Both hoses go to the valve body - the hook in there. then 2 hoses go to the tractor - one for the pressure, one to the return or drainback side. I put a tee on the knob that is the fill point. It had a little depth gage. I took this out sisnce it would not be accurate because of the length of the tee. I put the knob on the top, the return from the valve on the side, and the bottom went where the knob went. I made a bracke at work the bolts to the clamp for the hitch. I drilled 2 holes in the clamp - a square tube piece. I mounted a piece of alum. angle - 6"x4x4 and transferred the hole pattern from the valve body. It works great. And of course I painted it Farmall RED!!!!
Follow Ups:
Home
| Forums
Today's Featured Article -
Repairing A Massey Harris 22 - by John Reeves. I have just given this old girl (boy?) a replacement RH rear axle. I was lucky enough to find an axle in good shape at a reasonable price - also a replacement for the right rear brake assembly which was
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|