Farmall & IHC Tractors Discussion Board |
Farmall H Generator Problem
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Paul on July 16, 2002 at 11:48:01 from (208.38.45.6):
I had my generator rebuilt and the shop says it's working, but I still don't get any higher voltage across the battery with the engine running.The ammeter reads slight discharge. It's the original 6 volt system with the 4 position light switch and cutout relay mounted on the generator. I had polarized the generator by jumping from the BAT terminal of the relay to the A terminal of the generator. With the engine off and the leads disconnected from the A and F terminals I held all the brushes away from the commutator and put one lead of my ohmmeter on the A terminal and the other on the generator mounting bolt, and the ohmmeter needle deflected. Does this make sense? I expected no deflection, thinking that the only connection between the armature and ground is through the grounded brush, which was held away from the commutator. Am I missing something or does this mean there is still something wrong with the generator? Also, when it was running I put the voltmeter across the A terminal and ground and got about 1.5 volts. Does this mean anything? I also tried running it with the F terminal of the generator grounded but it gave no improvement. Anything else I should check?
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|