Farmall & IHC Tractors Discussion Board |
Nuts and bolts question
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by ScottyNY on June 12, 2002 at 14:16:35 from (128.59.42.195):
A while back I was web shopping for square-head bolts and you all helped me get straight on needing at least a grade 5 if not 8 for bolting my rims to the wheels (a SuperC and a BN). I've found some 5s and 8s in the right sizes but there's no mention of grading on nuts. Two questions. Are the nuts commonly available in different grades? If not and the nuts are grade 2(Lordknows, I've got a mess of them!), will it make any difference in my application? I'd think the softer nut might give me a little better jam when I tighten them down, and I suspect the shear strength of the bolt is more critical than the lateral tension. Am I thinking straight? Thanks for any help. Scotty
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|