Farmall & IHC Tractors Discussion Board |
M Gov. Trouble
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by W.T. on February 04, 2002 at 06:45:02 from (198.26.123.38):
Here is my trouble with this M. The throttle advance has 13 teeth, as I increase the throttle I'm at the fifth tooth before the RPMs start to pick-up and by the time the lever is at the 10th tooth its at full throttle, and feels like you are out of linkage, trying for the last tooth starts to bows the linkage to the bell crank. Start to decrease the throttle and it's down to the 7th tooth before it starts to loose RPMs. Motor off and lever off the bumper spring is aginst it's stop, spring is just free. Linkage between carb and gov. cross shaft is smooth. And I've adjusted the rod and block so the pin slips in easy. Where am I wrong here? Things inside the gov. look good, no bearing play ect. Also my manual says that with the throttle lever off the tounge on the gov. cross shaft should be holding the throttle plate in the carb full open. Is this right? If so the motor would run full throtle on start up? No? Could this trouble in the throttle bell crank and if so how is that thing adjusted? This is a rebuild of a parts tractor not one that just started having trouble. I feel good that she even ran. Thanks for the help.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|