Farmall & IHC Tractors Discussion Board |
Farmall C Fluids
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by ed342 on June 01, 2007 at 13:18:13 from (216.234.123.207):
To date this forum has been remarkably useful for all of my Super C questions. But re: the fluids I need a bit more info and some clarifications. I'm dealing with 2 tractors, one with a probably broken axle and the 2nd I hope to not have that problem with. I want to change the pto, trans. and axle fluids. I am told the 3 are actually all one unit and use the same fluid - a 90 wt. I have a drain plug on the bottom of the axle and a small level check plug (I think it is) on the right rear of the axle housing. Do these drain and level check all three units? I have what appears to be a large fill plug (1&1/4) on the left deck side near the shift lever and a second identical plug on top of the pto unit. My 1st question is if the 3 units are all one, why 2 fill plugs? 2nd question: each of these 1&1/4 (fill) plugs is threaded on the sides, has a large round hole on top and is concave on the inside. Only about 2-3 threads show above the surface - appears they came this way. How does one get them out? Are there any other fill holes for pto/trans/axle? Also, anyone have a recommendation for a labor rate to pay for replacing a broken axle? Anyone know of a good book to buy that deals fully with specs. and repairs for the Super C, hopefully w/scematics, photos and directions for the beginner, and where to find it? Thanks, Ed
Replies:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|