Farmall & IHC Tractors Discussion Board |
Super A Engine Identification
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by kurt on July 02, 2001 at 09:52:56 from (208.191.217.82):
I have a 1950 Farmall Super A, chassis number 286844 and the chassis plate also says "1540" (is that the maximum engine rpm?). Serial number on the engine block is FAA M 287275 D. Part number on block is 251069 R1. Tractor has 4 hole hood, radiator shutters, no water pump, and probably had a maniford baffle for running on distillate/kerosene fuel. Engine block casting and such numbers on rest of tractor are April 1950. The "FAA" is perfectly aligned but the "M" is just a little off center and offset an extra space to the right of the last "A" in the "FAA." My question is why doesn't the engine number have a suffix letter for distillate or kerosene, and what does the "M" in "FAAM" mean? My understanding is that the "D" suffix means 5000 feet high altitude pistons, is that right? Lastly, what is the compression ratio with such pistons? Thanks for any information. Kurt
Follow Ups:
Home
| Forums
Today's Featured Article -
Tractor Profile: Silver King - by Staff. Silver King tractors were produced by the Fate-Root-Heath Company of Plymouth, Ohio. The company was founded by John Fate in 1884 and was originally called the "J.D. Fate Company". After several mergers over the years, the final company name of Fate-Root-Heath came about in 1919. The first tractor produced was actually called the "Plymouth" tractor and was powered by a 20 HP 4-cylinder engine with a 3x4" bore and stroke. The four speed transmission had a top speed of 25 mph! After more t
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|