Farmall & IHC Tractors Discussion Board |
How to separate clutch from flywheel?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Lowell Davis on April 26, 2001 at 17:34:51 from (207.206.16.228):
I'm having no luck removing the clutch shaft from my Farmall M, despite having removed the clutch linkage (release shaft, fork, etc.). The clutch shaft bumps up against the transmission driving shaft coupling before the splined end clears teh driven member, and the trans couplings bumps up against the clutch shaft before it's free of the transmission driving shaft. There's not enough play to get one past the other (I've tried every point of the compass). I thought as a last-ditch effot I'd pull the clutch from the flywheel (may as well check the facings as long as I've got this far), but it won't budge. I've removed the six cap screws and put three of them in the holes provided to compress the clutch. It's not moving. How can I get the clutch free of the flywheel? Thanks -
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|