Farmall & IHC Tractors Discussion Board |
Farmall A not running right
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Keith Seymore on April 23, 2001 at 03:50:28 from (208.223.205.168):
Gentlemen - I have a 1942 Farmall "A" that I restored about 6 years ago. I use it for fine mowing, pushing snow and dragging the trailers around. I used it to mow last Thursday and, as usual, it performed flawlessly. However, on Saturday, we were trimming trees and using it to drag the branches to the burn pile, and it starting acting up. It acted like it was running lean (cutting out) and now will only run with the choke about 3/4 or full on. The choke situation leads me to believe it is fuel related. I pulled the carb and checked for fuel flow - its got a good stream of fuel. I pulled the carb apart but it looks clean and new inside (it is a new Zenith from when I restored it). I tried adjusting the idle air mix screw and the fuel mixture screw but neither had any effect like they usually do. Any thoughts? Thanks for a great forum.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|