TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Tractor Talk Discussion Forum

Hooking disc mower to MF1105

Welcome Guest, Log in or Register

Author

KYfarm

04-29-2006 14:15:12

Report to Moderator

Anybody with any good thought on how to hook the chains from a NH disc mower to the top line on my MF1105. My past tractors had a removeable top pin to hook the third link to and the chains.

This 1105 has a much heavier set-up but no easy method for attaching the disc mower, any suggestions?

[Log in to Reply] [No Email]

barnrat

04-29-2006 17:26:12

Report to Moderator

Re: Hooking disc mower to MF1105 in reply to KYfarm, 04-29-2006 14:15:12

The vertical pin should come right out with a couple of good hammer raps, it looks to be rusted in place(replace with longer pin if needed). Only thing thats different on the 1000 series masseys is that the pin is vertical instead of horizontal like most 3 point top links. You may have to use a clevis when hooking up your chain, that is what I had to do when I barrowed my neighbors Vicon disc mower. What will really make you scratch your head is try to hook up a post hole digger. One Last thing, dont mess with the horizontal pin that is bolted to the tractor.

[Log in to Reply] [No Email]

KYfarm

04-29-2006 18:27:35

Report to Moderator

Re: Hooking disc mower to MF1105 in reply to barnrat, 04-29-2006 17:26:12

Thanks for the help, I see, one chain on top and the other on bottom instead of either side.

Thanks alot!

[Log in to Reply] [No Email]

edchainsaw

04-29-2006 18:26:37

Report to Moderator

Re: Hooking disc mower to MF1105 in reply to barnrat, 04-29-2006 17:26:12

you can mess with that horizontal pin.. it is part of the draft control setup that plate is a big spring..

and I have a vicon disc mower and have no chains what so ever so I have no clue why you would need to :)

[Log in to Reply] [No Email]

Roy in UK

04-30-2006 02:55:19

Report to Moderator

Re: Hooking disc mower to MF1105 in reply to edchainsaw, 04-29-2006 18:26:37

I am a bit baffled too, what is the chain for? is it a fully mounted mower or trailed mower with an "A" frame that fits the linkage. I have had a Vicon 8 foot mounted disc mower too. The MF 1100 we had would have been a bit like over -kill on that one.

[Log in to Reply] [No Email]

barnrat

04-29-2006 18:37:17

Report to Moderator

Re: Hooking disc mower to MF1105 in reply to edchainsaw, 04-29-2006 18:26:37

I"ve been around 1000 series Massys all my life. I know all about the draft spring on the top link, but it was better left alone for this discussion.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy