Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum

FMD head and bearing cap bolts

Welcome Guest, Log in or Register
Author 
Mark

11-20-2002 01:00:49




Report to Moderator

Have just finished replacing old liners in my
Fordson Major Diesel. The manual gives no clues as to torque settings for the head bolts or bearing cap
bolts.
No head bolt tightening sequence either.

Can anyone help me out with these.

Thanks guys

Mark




[Log in to Reply]   [No Email]
Bill Hires

11-20-2002 16:34:00




Report to Moderator
 Re: FMD head and bearing cap bolts in reply to Mark, 11-20-2002 01:00:49  
Head bolts 85-90, connecting rods 55-60, main bearings 70-75, manifold 20-25, injectors 12-15.
The head bolt tightening sequene is to start with the center bolt and work in a circle to the outside of the head. Do this in three steps 30, then 60, then 85.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy