TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

Farmall M Main Shaft Pilot Bearing

Welcome Guest, Log in or Register

Author

GertM

11-13-2007 13:35:24

Report to Moderator

Hi Fellows,

Does anyone of this nice forum has an idea if there is a brand like SKF,Timken (or equal) or supplier around who supplies new main shaft bearing?Mine is totally worn and is from the brand"bower"USA.Maybe someone has an idea what bearings can replace it?
It's about the little cone-bearing witch turns in the uppershaft on engine side.
No.72 in the manual with no.43357D.

Maybe another good solution availabe?

[Log in to Reply] [No Email]

GertM

11-15-2007 07:50:49

Report to Moderator

Re: Farmall M Main :SKF!! in reply to GertM, 11-13-2007 13:35:24

Hi Folks,

there is a good more valuable solution for the Main shaft bearing.SKF has a bearing in standard programm:The NU2205ECP witch is cheap,great quality and can be mounted easily.Is 2 mm.shorter but the ebaring doesn't get big axial forces so this works out with a little loctite.

De cylinder however are on outside and separate inner ring on shaft.Just the way around as tyhe original.

When it's worn I will be in elderly-people home by then.My MV will be on the old iron pile..haha!!Thanks for sharing ideas

[Log in to Reply] [No Email]

GertM

11-13-2007 23:55:41

Report to Moderator

Re: Farmall M Main Shaft Pilot Bearing in reply to GertM, 11-13-2007 13:35:24

Great this info.I appreciate people who thinks with me!!

Thanks and will try to purchase on this side of the pond that Hyatt bearing.

[Log in to Reply] [No Email]

Bob

11-13-2007 22:53:22

Report to Moderator

Re: Farmall M Main Shaft Pilot Bearing in reply to GertM, 11-13-2007 13:35:24

FWIW, it's a Hyatt bearing, part number A-5205-TS.

CRB = Cylindrical Roller Bearing

LGT = Light

WD = Wide

W/SEP Inner Ring

Third Party Image

[Log in to Reply] [No Email]

Bob Kerr

11-13-2007 20:57:22

Report to Moderator

Re: Farmall M Main Shaft Pilot Bearing in reply to GertM, 11-13-2007 13:35:24

I had to get one from a bearing supply house and even they had to order it in from a company that handles old stock. They are no longer made for the H and likely will not be made again after the current supply is gone. I would suspect the same deal goes for the bearing for the M. If CIH has them they will want a premium for them. The bearing house I used charged about $43 for the bower bearing for the H.

[Log in to Reply] [No Email]

r4etired

11-13-2007 18:58:55

Report to Moderator

Re: Farmall M Main Shaft Pilot Bearing in reply to GertM, 11-13-2007 13:35:24

I bought one this summer from CIH dealer.

[Log in to Reply] [No Email]

r4etired

11-13-2007 19:05:18

Report to Moderator

Re: Farmall M Main Shaft Pilot Bearing in reply to r4etired, 11-13-2007 18:58:55

If you go to CIH for one take your serial no.I can't remember when in the 50's they changed from a bolt and washer to a snap ring to hold the pilot bearing, not sure if they changed the bearing then or not.These golden years are hard on a guys memory.

[Log in to Reply] [No Email]

Janicholson

11-13-2007 14:54:23

Report to Moderator

Re: Farmall M Main Shaft Pilot Bearing in reply to GertM, 11-13-2007 13:35:24

Both on line and in person I have found Motion Industries to be the most crisp in getting bearing/seal/motor/bushing/chain components. If it has a Bower number, it is available. If no number is visible, take it in and they can match it up pronto. JimN

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy