TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

2 point hitch-3 point hitch

Welcome Guest, Log in or Register

Author

bdn

09-23-2006 06:30:38

Report to Moderator

I have a farmall superC and it seems to me to have a two point hitch. Is there any way to hook a bush hog to this tractor. My Ford and Furgeson both have 3 point hitches but are not strong enough for the bush hog. If anyone knows how or where to do a 3rd point hookup it would be greatly appreciated.
Barney

[Log in to Reply] [No Email]

the Unforgiven

09-23-2006 16:05:54

Report to Moderator

Re: 2 point hitch-3 point hitch in reply to bdn, 09-23-2006 06:30:38

I built one just like Wardner's third picture, found some small points and fabricated from there. The C does not lend itself real well to the top-link adaptor, but it can be done. All of my little 3pt. stuff varies in width enough that it will cause mounting problems on a rigid or ball and prong style adapter, so I came up with an L-shaped locking slot instead of a ball socket, it is more forgiving width-wise, and faster to hook up. Whatever you use, the shorter the better. My SC seems like it will handle a little more load on the hitch than my Fords, and the down pressure is real nice too.

[Log in to Reply] [No Email]

Wardner

09-23-2006 10:22:30

Report to Moderator

Re: 2 point hitch-3 point hitch in reply to bdn, 09-23-2006 06:30:38

The easiest way is to purchase an IH conversion adaptor. I think they were produced in the aftermarket as well. I have two and they are both different. Mine have the large points so I am not sure if they were available for the C-sized points.

I just finished adapting a Valby chipper to my 504 set up with a Fast Hitch. I drilled two IH points to accept the 3PTH lower pins. The top link is secured to a bracket I made for the back of the 504.

Send me an email, I will take some pictures.

[Log in to Reply] [No Email]

Wardner

09-23-2006 13:04:36

Report to Moderator

Re: 2 point hitch-3 point hitch in reply to Wardner, 09-23-2006 10:22:30

Homemade top link adaptor

[Log in to Reply] [No Email]

Wardner

09-23-2006 13:11:45

Report to Moderator

Re: 2 point hitch-3 point hitch in reply to Wardner, 09-23-2006 13:04:36

Cheap way to adapt 3pth implement to Fast Hitch. Need a spare set of FH points and top link.

[Log in to Reply] [No Email]

Wardner

09-23-2006 13:20:14

Report to Moderator

Re: 2 point hitch-3 point hitch in reply to Wardner, 09-23-2006 13:11:45

This is an IH adaptor I used to mount a 3pth bush hog on to a SMTA with Fast Hitch.

[Log in to Reply] [No Email]

Wardner

09-23-2006 13:26:18

Report to Moderator

Re: 2 point hitch-3 point hitch in reply to Wardner, 09-23-2006 13:20:14

This is a later style adaptor made to fit Fast Hitches with removable sockets.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy